If you own a 2016 Dodge Dart, you may encounter a situation where the key fob gets stuck in the ignition.
This can be a frustrating problem that leaves you unable to start your vehicle.
In this article, we’ll explore some effective ways to fix a 2016 Dodge Dart key fob stuck in the ignition.
Whether you’re at home or on the go, these solutions can help you quickly and easily resolve the issue, so you can get back on the road without any further delay.
So let’s dive right into it!
Common Causes of 2016 Dodge Dart Key Fob Stuck in Ignition
It’s one of those mysterious problems that seem to have no easy explanation. But more often than not, there are common causes for this issue – from battery corrosion to broken springs and other mechanical issues.
Battery corrosion is a fairly common cause of a key fob sticking in the ignition.
Corrosion builds up on the metal contact points inside the battery compartment, which interferes with the electrical connections when you try to start your engine or remove your key fob.
This leads to difficulty turning off your vehicle as well as inserting or removing your key fob.
|Possible Causes of a Dodge Dart Key Fob Stuck in Ignition
|Corrosion buildup on the metal contact points inside the battery compartment can interfere with the electrical connections, making it difficult to start the engine or remove the key fob. This can lead to the key fob getting stuck in the ignition.
|Weak or broken springs can prevent the switch from disengaging properly when inserting or removing the key fob. This can cause the key to get stuck in the ignition, making it difficult to turn off the car or remove the key fob without encountering further issues.
|Other mechanical problems, such as a faulty ignition cylinder or damaged key fob, can also cause the key fob to get stuck in the ignition. In some cases, this may require professional repair or replacement.
Broken springs can also lead to keys getting stuck in the ignition because they prevent the switch from disengaging properly when you insert or remove your key fob.
If these springs become weak over time due to wear and tear, it becomes difficult to turn off your car or take out your keyfob without running into any further problems.
In summary, if you’re having trouble with a dodge dart key fob stuck in the ignition, then chances are either battery corrosion or broken springs are causing it.
In both instances, it’s essential to get professional help so that all components of your car’s ignition system work correctly again and solve this problem once and for all!
2016 Dodge Dart Key Stuck In Ignition – Diagnosing The Problem
The presence of a stuck key fob in the ignition immediately indicates either faulty parts or a design flaw with the key itself.
To determine which one it is and to resolve this issue, here are 3 steps to take:
- Check for any loose connections in the wiring leading up to the ignition cylinder
- Inspect the components making up the key for any signs of damage or wear-and-tear
- Test each individual part using specialized tools and techniques
By following these steps you can assess what exactly is causing your Dodge Dart’s key fob to get stuck in its ignition.
It could be due to defectively made parts or an inadequate design of the physical shape of the key itself.
In any case, by taking time to go through each step carefully you’ll have a better chance at finding out why this happened and how best to fix it.
Attempting Diy Fixes
If you’re experiencing the frustrating issue of a 2016 Dodge Dart key fob stuck in the ignition, there are some DIY fixes you can attempt before seeking professional help.
These simple solutions can often resolve the issue without the need for expensive repairs or replacement parts.
Here are some of the most common DIY fixes for a stuck key fob in the ignition, so you can get back on the road as soon as possible.
1. Leverage Tools
When attempting a DIY fix, the first thing to consider is leveraging the right tools.
As an experienced car ignition expert with years of experience under my belt, I always recommend having a remote troubleshooting kit handy.
This can help you diagnose and repair issues such as stuck key fobs in your Dodge Dart’s ignition switch.
You may have to purchase some new parts or lubricants depending on the issue, but it’s worth it if it saves you time and money down the road.
Plus, there are lots of online tutorials that can walk you through any project step-by-step.
With the right knowledge and resources at your disposal, tackling this kind of problem yourself isn’t impossible!
2. Lubricate Parts
Once you have the right tools, it’s time to look at any jamming mechanisms in your Dodge Dart’s ignition cylinder.
- If there is a buildup of dirt or debris present, use a lubricant such as WD-40 to loosen it up and help get your key back into place.
- This usually works great but if that doesn’t work then it may be time to buy some new parts like an ignition switch replacement.
- Finally, keep in mind that despite all these solutions, sometimes getting professional assistance might still be the best option for certain repairs – especially when dealing with sophisticated systems like those found inside cars.
If it seems too daunting or complicated for you to do on your own, don’t hesitate to call a mechanic who specializes in repairing vehicles like your Dodge Dart.
3. Check Tension
Once you’ve looked at the jamming mechanisms of your Dodge Dart’s ignition cylinder, it’s time to check the tension.
- I recommend testing the tension by attempting to turn the key when it is in the off position.
- If this doesn’t work or if there are any difficulties with turning the key then it could be a sign that something isn’t quite right and should be checked out further.
- You can also try using some replacement parts such as a new switch that may help alleviate tension issues.
Just keep in mind that this type of repair requires experience and precision so don’t attempt it unless you feel confident in your abilities – otherwise, call a professional!
Professional Repair Services
It’s estimated that up to a quarter of all car owners have experienced a key fob stuck in their ignition at some point.
When faced with having your key fob stuck in the ignition it can be an extremely stressful situation, but don’t worry – there are several solutions available!
1. One option is remote programming which allows you to unlock and start your car from afar using only the click of a button; another solution is to replace your entire key fob system altogether.
2. No matter what option you choose for dealing with this problem, make sure you take extra care when handling your keys so that you won’t end up back in the same predicament again anytime soon.
With just a bit of foresight and preventative measures, you’ll be able to get behind the wheel without any issues down the road.
Preventative Maintenance Tips
Making sure that your car ignition system is functioning properly is key for a reliable, safe driving experience.
I recommend taking care to always handle the key fob gently and regularly clean it off with a damp cloth or brush-based cleaner.
This will help ensure your key fob stays in good condition and doesn’t get stuck inside the ignition like yours did.
It’s also important to make sure all connections are secure between the fob, the vehicle battery, and other components as well.
|Tips for Preventing a Stuck Key Fob in the Ignition
|1. Handle the key fob gently and clean it regularly with a damp cloth or brush-based cleaner.
|2. Ensure all connections between the fob, vehicle battery, and other components are secure by inspecting them monthly.
|3. Replace any faulty parts immediately to prevent future issues. If unsure, take your car to a certified mechanic.
|4. Use caution when putting the key fob back into the ignition, making sure there’s no obstruction such as dirt or debris.
Inspect each connection at least monthly and replace any faulty parts immediately to prevent future issues. If you’re unsure about how to check these connections yourself, take your car to a certified mechanic who can do it quickly and safely.
To avoid getting stuck again, use caution when putting the key fob back into the ignition after you’ve started up your engine.
Make sure that there isn’t anything obstructing its way before pushing it all the way in; this includes dirt or debris from outside which may have gotten caught on the edge of the fob itself during insertion.
With careful handling and regular cleaning, you can enjoy worry-free driving without fear of having your key become stuck again!
One of the most frustrating experiences any car owner can have is a key fob stuck in the ignition. But, with some basic knowledge and preventative maintenance tips, you can avoid this irritating predicament.
I’ve had many clients over the years tell me stories about their key fobs getting stuck in their car’s ignitions; one client even told me that after his key got stuck he was so frustrated, he wanted to take a hammer to it!
Luckily, I was able to help him out without resorting to such drastic measures and gave him advice on how to maintain his ignition system properly going forward.