If you’re driving a Chrysler Town and Country and your check engine light comes on, don’t panic! There are a few things you can do to troubleshoot the issue. First, check your gas cap to make sure it’s tight. If it’s loose, tighten it and see if the light goes off. If the light is still on, you may need to take the car to a mechanic for further diagnosis.
Contents
Why Does Chrysler Town and Country Have a Check Engine Light?
The Chrysler Town and Country has an engine check light that comes on when the vehicle’s computer detects an issue with the emission control system. The light will come on when the engine is first started, and will usually turn off after a few seconds. If the light stays on, it indicates that there is a problem with the emission control system that needs to be addressed.
6 Common Causes of Engine Check Lights
There are a variety of common causes of the check engine light, including:
- A loose or faulty gas cap
- A problem with the evaporative emissions system
- A problem with the oxygen sensor
- A problem with the catalytic converter
- An exhaust leak
- A misfire in the engine
How Can I Reset the Check Engine Light?
Check engine lights come on when your car’s computer detects an issue within the powertrain. Chrysler Town and Country have a tendency to throw check engine codes for random misfires, so it’s important to reset the light as soon as possible.
The easiest way to reset the check engine light is to drive the vehicle for at least 30 minutes at highway speeds. This will allow the computer to reset itself and clear any pending codes.
If the light does not automatically reset, you can also disconnect the battery for a few minutes. This will clear all codes from the computer and should reset the light.
Some Common Symptoms of Check Engine Light?
When the check engine light comes on, there are a number of things that could be the cause. It could be something as simple as a loose gas cap, or it could indicate a more serious problem with the engine. The light will usually come on when the engine is not running properly, and it will stay on until the problem is fixed.
Common symptoms of a check engine light include:
- The engine is running rough
- The engine is misfiring
- The engine is hesitating or stalling
- The exhaust system is leaking
Should I Take My Car to the Mechanic if Check Engine Light Is On?
The engine light is one of the most important lights on your car’s dashboard. It means something is wrong with the engine and needs to be fixed. If the light is on, you should take your car to a mechanic to have it checked out.
How Much Will It Cost to Fix Check Engine Light?
The cost to fix the check engine light on your Chrysler Town and Country will vary depending on what is causing the light to come on. If it is a simple fix, such as a loose gas cap, it may only cost you a few dollars.
However, if the problem is more serious, such as a faulty oxygen sensor, it could cost several hundred dollars to fix.
Consequences of Ignoring Check Engine Light
Ignoring the check engine light can have serious consequences. Your car may run less efficiently, and you may end up doing damage to your engine. In some cases, ignoring the check engine light can even void your warranty.
What to Do if Check Engine Light Comes on While I’m Driving?
If the engine check light comes on while you are driving:
- Don’t panic
- Check to see if the oil level is low. If it is, add oil
- If the oil level is fine, keep driving and see if the light goes off
- If the light doesn’t go off, or if it comes on while you are driving, take the vehicle to a mechanic or your dealership as soon as possible to have it checked out
Conclusion
In this article, we discussed what happens when the engine check light appears on Chrysler and Country. We explained the possible reasons why the check engine light turns ON and discussed the possible solutions that you can consider to fix it. It would be better if you take your car to a certified car mechanic.
