Honda CRV Key Won’t Come Out Of Ignition [Ultimate Guide]

Honda CRV Key Won’t Come Out Of Ignition [Ultimate Guide]

Hi there, my name is John and I’m a Car Ignition Expert with years of experience.

If you’re having trouble getting your Honda CRV key out of the ignition, don’t worry! You’ve come to the right place for help.

It’s a common problem that can be easily solved by following some simple steps:

In this article, I’ll explain why your key won’t come out and what you need to do in order to get it working again.

Honda CRV Key Won't Come Out Of Ignition [Ultimate Guide]

Diagnosing The Problem


It’s incredibly frustrating when a key won’t come out of the ignition of your Honda CRV – I know this from personal experience.

The first thing you need to do is test the fuses, as they may be preventing electrical power from being sent to the ignition switch.

This can easily be done with a multimeter or by using an operating voltage tester.

Next, it’s important to inspect the wiring around the steering column and other related parts for any signs of corrosion or wear that could potentially cause an issue like this.

You’ll want to make sure all connections are firmly in place, too.

If there don’t seem to be any problems with these elements then it might indicate a deeper mechanical problem within the car itself.

At this point, if none of these steps have solved your problem then it would be best to take your vehicle into a mechanic who specializes in Honda vehicles for further troubleshooting and repair work.

They will likely have more advanced tools and knowledge necessary in order to effectively diagnose and resolve whatever issue is causing your key not to come out of its corresponding ignition slot.

Removing The Ignition Lock Cylinder

Removing the ignition lock cylinder from a Honda CRV can seem intimidating, but it’s not as difficult as you may think.

With the right tools and some patience, anyone with basic mechanical experience can do this job quickly and safely.

First off, let me address one of your most likely concerns: will I have to replace any parts? The answer is no – all we’re doing here is swapping out one part for another.

Now that we’ve got that out of the way, let’s get to work! You’ll need an appropriate set of installing tools plus a few additional components like gaskets and screws to secure everything in place.

Depending on your model, you might also require specialized wrenches or other specialty items so double check before beginning the job.

Once you have all the necessary pieces together, follow these steps:

  • First remove the steering wheel column cover
  • Disconnect the battery cable
  • Remove the steering wheel
  • Remove the clock spring
  • Disconnect the ignition switch connector
  • Remove the lower column cover
  • Remove the upper column cover
  • Remove the combination switch
  • Remove the key cylinder assembly

Remember that safety should always come first when working on cars – wear protective gear if possible and remember to keep track of small bits while detaching components.

If at any point during this process something doesn’t feel quite right don’t be afraid to take a break and reassess what needs to be done.

After all, replacing an ignition lock cylinder isn’t worth risking personal injury!

Replacing The Ignition Lock Cylinder

If your Honda CRV’s key is stuck in the ignition and won’t come out, it may be time to replace the entire ignition lock cylinder.

This can sound daunting at first but with a few simple steps you’ll have that old part replaced in no time.

Here are three easy steps for replacing your Honda CRV’s ignition lock:

  1. Disconnect the negative battery cable from the car battery
  2. Remove screws or bolts around the steering column and remove the cover plate
  3. Unplug the wiring harnesses connected to the ignition switch and then take out both pieces of hardware

Once these parts are removed, you should be able to slide out the old ignition lock cylinder and install your new one by reversing this process.

Make sure all wires and connectors are plugged back in securely before trying to start your vehicle with its new key fob!

With careful attention and patience, anyone can get their Honda CRV running smoothly again without needing assistance from an automotive expert.

Reinstalling The Ignition Lock Cylinder

The first thing you need to do when your Honda CRV key won’t come out of the ignition is to reinstall the ignition lock cylinder.

Fortunately, this isn’t as hard as it sounds and can be done with a few simple steps.

First, turn off your engine and make sure the steering wheel is unlocked.

You will then want to remove the three screws that secure the cylinder housing in place.

Once they are removed, take off the housing cover so you can access the ignition switch.

Now comes the trickiest part: removing and replacing the cylinder itself.

To get started, slide out on old lock cylinder with a flathead screwdriver while turning it counterclockwise until it releases from its mountings inside the switch.

After that’s done, insert your new lock into position by pushing it back in while simultaneously rotating clockwise until you hear an audible click indicating it has been locked in place correctly.

And there you have it – all set for another round of trouble-free driving!

Troubleshooting Tips

I’ve been an ignition expert for years and I can tell you that there’s nothing more annoying than a Honda CRV key won’t come out of the ignition.

It happens, but it doesn’t have to happen if you follow some simple rules for jamming prevention.

First off, make sure your key is properly lubricated with WD-40 or graphite powder.

This will ensure smooth operation of your Honda CRV ignition switch.

Additionally, double check that all components are in good condition – this includes the lock cylinder housing, tumbler assembly and other parts related to the ignition system.

If any of these items need repair or replacement, get them taken care of right away!

Finally, take extra care when inserting and removing the key from the ignition.

Never force it as this could cause damage to both the key and its surrounding components.

With proper maintenance and careful usage habits, you should be able to keep your vehicle’s keys operating smoothly without ever having to worry about them getting stuck again!

Here are five tips on how to prevent your Honda CRV keys from getting jammed:

  1. Properly lubricate your key with either WD-40 or graphite powder every now and then;
  2. Ensure all components related to the ignition switch are in good working order;
  3. Avoid forcing the key into place;
  4. Inspect regularly for signs of wear and tear;
  5. Have any necessary repairs done by a professional automotive technician specializing in ignition switch repair.


It can be very frustrating when you try to turn off your car, only for the key not to come out of the ignition. Thankfully, with a few simple steps, this issue can quickly and easily be resolved.

With my years of experience as a car ignition expert, I’ve seen many cars with similar issues that have been fixed in no time at all.

Now, some may think this is something they need to take their vehicle into the shop for repair – but that’s actually unnecessary!

All it takes is following a few easy steps listed above and taking the necessary precautions while doing so, and you’ll soon have your Honda CRV’s key coming out of the ignition again just like normal.

Recourses Consulted For Research On Honda CRV Key Won’t Come Out Of Ignition [Ultimate Guide]

About the author

Team is a team of auto experts and experienced editors. The experts gives all the information, facts and technical details to the writers and then the editors make sure that the guides are to-the-point, easy-to-read and made JUST RIGHT for you.

Leave a Comment