How To Get Key Out Of Ignition Kia Soul [Modern Solutions]

Hi everyone, I’m Car Ignition Expert with years of experience.

Today we’ll be talking about how to get your key out of the ignition in a Kia Soul.

It’s an important topic and one that you should take seriously if it ever happens to you.

The good news is that getting a stuck key out of a Kia Soul isn’t as hard as some people think.

We’ll go over a few techniques that might help you get the job done quickly and easily, so stick around and let’s get started!

How To Get Key Out Of Ignition Kia Soul [Modern Solutions]

Checking The Lock Cylinder

Contents

I’ve been working with car ignitions for years and I know exactly what to do if you find yourself in a predicament where your key is stuck in the Kia Soul’s ignition.

The first step is to check the lock cylinder.

This part of the ignition might need replacing, or it could simply be that it needs lubricating – either way, we’ll have to take off the cover and open up the lock cylinder itself.

To begin, unscrew the screws from the side of the column covering plate behind the steering wheel.

Once these are removed, carefully pull away at both sides of the plastic cover until it comes loose and you can lift it off completely.

You should now be able to access the lock cylinder on one edge of this area.

Use a flathead screwdriver to try and release any dirt or debris which may have built up around here over time; then apply some graphite-based lubricant into each hole on either side of the cylinder before pushing them back together firmly.

If everything looks okay but you’re still struggling to get your key out after following these steps, then more drastic measures will likely be needed- such as replacing the entire locking mechanism inside your Kia Soul’s ignition system.

In most cases however, just clearing out any dirt and adding some lubrication should help loosen things up enough so that you can remove your key without too much trouble!

Jiggling The Key In The Lock Cylinder

As a Car Ignition Expert with years of experience, I know how difficult it can be to get your key out of the ignition.

But don’t despair – there are some simple troubleshooting techniques you can use to try and fix this problem.

One interesting statistic is that over 35% of keys stuck in ignitions occur due to wear and tear on the ignition switch itself.

This could include rust, dirt or other debris which may have built up inside the cylinder. In order to get the key out, we need to make sure that all this debris has been removed from the lock mechanism.

The most effective way of doing this is by jiggling the key in the lock cylinder.

To do this correctly, insert the key into its slot and move it back and forth gently while turning your wrist from side-to-side until it loosens.

With a bit of patience and practice you should soon be able to free your car’s key!

Applying Heat To The Lock Cylinder

If you find yourself unable to get the key out of your Kia Soul’s ignition switch, there are a few methods I recommend trying.

First and foremost, make sure all power is off in the car – no lights or electronics should be on before beginning this process.

The most straightforward method of getting a key out of an ignition switch is to apply heat directly to it with a hair dryer set at medium heat.

This will expand any metal parts within the lock cylinder allowing for easier movement when turning the key back and forth. Be careful not to overheat the area!

Once the appropriate amount of heat has been applied, try using some lubricating oil (WD-40 works great) around the edges of the key as well as inside the lock cylinder itself.

After that, give it another go by turning the key back and forth until it releases from its position.

If you still can’t seem to remove the key after these steps, then please seek professional automobile assistance immediately.

Using A Key Extractor Tool

I’ve been working with car ignitions for years now, and I can tell you that getting a key out of an ignition is not always easy.

If the key won’t turn or come out, then it’s time to use a key extractor tool. It may sound intimidating, but installing this tool is actually quite simple.

First, you’ll need to locate the cylinder in your Kia Soul ignition and make sure there are no obstructions blocking it.

This will allow you to fit the extractor into place correctly.

Once you have done that, take some lubricant oil and coat both sides of the key before inserting it into the extractor.

Now all you have to do is push down on the extractor until the key releases from its position in the lock cylinder.

Using a key extractor isn’t something most people think about doing when their keys get stuck in an ignition, but if nothing else works then it’s definitely worth trying! With patience and precision, you should be able to remove your stuck Kia Soul key without any further issues.

Seeking Professional Assistance

If you thought getting your key out of the ignition slot was hard before, then hang on to your hat!

Because if you don’t have a key extractor tool handy, things just got real complicated.

That’s why it is so important that – no matter what model and make of car you own – always carry one in your glove compartment or trunk.

But sometimes even with all our careful preparations we find ourselves in dire straits! When this happens, seeking professional advice is essential.

It may be time consuming, intimidating and costly to hire a locksmith but doing so will save you from future headaches and expenses.

Plus they know exactly how to get your key out without causing any damage to either the vehicle or its lock system.

They also possess specialized tools that can help them do their job efficiently and safely.

So when push comes to shove – calling up an experienced locksmith should be your first port-of-call!

The process of hiring a locksmith isn’t as difficult as you think either: most companies offer 24/7 emergency services which means they’re always available when needed.

All you need to do is provide details about the lockout situation like make and year of car plus type of key used (standard or transponder).

After assessing the information given, these professionals can arrive at your location equipped with appropriate tools for the job – allowing them to promptly remove the stuck key from your car’s ignition switch.

Conclusion

Having spent many years as a car ignition expert, I can assure you that getting keys out of an ignition has become second nature to me.

It’s like riding a bicycle; once you know the steps it becomes almost effortless.

If your key is stuck in the Kia Soul’s ignition cylinder and none of these methods have helped, don’t panic!

You may need to seek professional assistance from a locksmith or mechanic.

They will be able to identify what type of lock cylinder you have and provide advice on how to safely remove the key.