It’s that time of year again! The leaves are changing, the air is getting cooler and your Jeep Grand Cherokee’s climate control needs a reset. Here’s a quick and easy guide to Jeep Grand Cherokee Climate Control Reset.
Contents
How Does the Jeep Grand Cherokee Climate Control Reset Work?
The steps to reset the climate control in a Jeep Grand Cherokee are as follows:
- Locate the climate control panel on the center console.
- Press and hold the “Auto” button for three seconds.
- Press the “Info” button until the word “Reset” appears on the display.
- Press and hold the “Temp Up” and “Temp Down” buttons simultaneously for three seconds.
- When the word “Confirm” appears in the display, press the “Auto” button to reset the system.
Why You Might Need to Reset the Climate Control in Your Jeep Grand Cherokee?
If you notice the fan in your Jeep Grand Cherokee is blowing hot or cold air even when the system is turned off, you may need to reset the climate control. This can be caused by a variety of factors, such as a power outage or a blown fuse. Fortunately, resetting climate control is a relatively simple process.
- Start with the engine off and the key out of the ignition.
- Press and hold the recirculation button for five seconds.
- Turn on the engine and press the recirculation button again for five seconds.
- Press the Auto button followed by the Defrost button three times within five seconds.
What Can Happen If You Don’t Reset The Climate Control In Your Jeep Grand Cherokee
If you don’t reset the climate control in your Jeep Grand Cherokee after making repairs or Servicing your vehicle, a number of things can happen. The air circulation may not work correctly, the temperature settings may be inaccurate, and the whole system may not operate as efficiently as it should. In extreme cases, you may even end up with a wet or musty smell coming from the vents. If you’ve recently had work done on your Jeep Grand Cherokee, make sure to reset the climate control before driving it again.
How To Avoid Needing To Reset The Climate Control In Your Jeep Grand Cherokee
If you own a Jeep Grand Cherokee, you may have experienced the frustration of needing to reset the climate control system after the battery is disconnected or replaced. Luckily, there is a way to avoid this issue altogether.
To keep from needing to reset the climate control in your Jeep Grand Cherokee, simply do the following:
- Before disconnecting or replacing the battery, always make sure to turn the climate control system off completely.
- To do this, push and hold the “Off” button on the climate control panel for three seconds.
- After the battery has been reconnected or replaced, turn the climate control system back on by pressing the “On” button.
- You should not reset any settings or make any adjustments, as long as you follow these steps.
Tips For Using The Climate Control In Your Jeep Grand Cherokee
The Jeep Grand Cherokee is equipped with a climate control system that allows you to set the temperature for the interior of the vehicle. You can also set the fan speed and choose from a variety of other settings to keep the cabin comfortable.
Here are some tips for using the climate control system in your Jeep Grand Cherokee:
- To turn on the climate control system, press the “clim” button on the center console.
- Use the knob on the left side of the console to adjust the temperature. The knob on the right side is used to adjust the fan speed.
- To direct airflow to different parts of the vehicle, use the vents on the center console and on each side of the dash.
- To turn off auto mode, press the “recirc” button. This will prevent outside air from coming into the vehicle.
- To turn off the climate control system, press and hold the “clim” button for three seconds.
Troubleshooting The Climate Control In Your Jeep Grand Cherokee
If you’re having trouble with climate control in your Jeep Grand Cherokee, there are a few things you can do to troubleshoot the issue. First, check to make sure that the power is turned on and that the batteries are properly installed in the remote control. If the problem persists, try resetting the system by pressing the “reset” button on the control panel. If none of these solutions work, you may need to take your Jeep to a professional for service.
What are some of the Causes of Problems in the Jeep Grand Cherokee’s Climate Control?
If your Jeep Grand Cherokee has some issues with Climate control, the issues can include:
- If your heater is working fine but the air conditioning is not working, it may be because of some issue with the blend door actuator.
- If you are witnessing more fuel consumption, and a reduction in airflow, heating, and cooling, there is a strong possibility of dirt build-up on the cabin filter.
- A fault in the cooling fan might result in the failure of the system to blow enough air.
- If your Jeep Grand Cherokee cooler turns on and off randomly, it happens due to problems with electric systems.
How To Get The Most Out Of Your Jeep Grand Cherokee’s Climate Control
Whether you’re driving in hot weather or cold, it’s important to get the most out of your Jeep Grand Cherokee’s climate control system. Here are a few tips on how to do that:
In hot weather, use the “recirculate” setting on your AC to keep the cool air circulating in the cabin. This will help prevent the AC from working overtime and will keep you more comfortable.
In cold weather, use the heated seats and steering wheel to stay warm. You can also set the climate control to “defrost” to help clear any frost or ice from the windshield.
If you’re not using your Jeep Grand Cherokee for a long period of time (such as during winter), it’s a good idea to disconnect the battery so that you don’t have to worry about it draining.
FAQs
Q. How Do I Reset the Climate Control in My Jeep Grand Cherokee?
A. First, locate the “Mode” button on your climate control panel. This button is usually labeled with a picture of a snowflake.
Once you have found the “Mode” button, press and hold it for about five seconds. After five seconds have passed, all of the lights on the climate control panel should flash. This indicates that the system has been reset and is now ready to be programmed.
Q. What Are the Causes of Climate Control Problems?
A. Failing fan motors, degraded fan relays, Faulty vents, an insufficient amount of coolant in the Engine, a broken interior temperature sensor, and a refrigerant fuel leak are the possible reasons for problems in Jeep Grand Cherokee Climate Control.
